Threaded feet M4 for gluing 13mm
Threaded M4 feet are glued to letters to easily attach M4 threaded ends.
These threaded feet can be used in combination with the Easyfix Steel Plus spacers. Suitable for indoor and outdoor use.
To achieve an even stronger connection, you can drill a 7mm hole and glue the feet upside down in the hole
Order more, pay less! Order now:
- Price per pieceExcl. Tax
-
€0.27 Excl. Tax€3.27 Incl. Tax
-
€0.26 Excl. Tax€3.10 Incl. Tax-5%
-
€0.24 Excl. Tax€2.94 Incl. Tax-10%
-
€0.23 Excl. Tax€2.78 Incl. Tax-15%
-
€0.22 Excl. Tax€2.61 Incl. Tax-20%
For sale in increments of 10 pieces.
€0.27
Excl. Tax
0,
15.5.
Delivery time 1-3 days
Excl. Tax
Incl. Tax
In stock
High quantities?
Request a quote
Ordered before 2.30pm, shipped on the same working dayAlways in stockOwn warehouse in the NetherlandsYour sign supplier since 1986Description
Threaded feet M4 for gluing 13mm
Specifications
| Article number | SDVM42 |
|---|---|
| Outside Diameter (mm) | 13 |
| Inner Diameter (mm) | 4 |
| Usage | Outside and inside |
| Width (mm) | 13 |
| length (mm) | 8 |
| Usable length (mm) | 8mm |
| gtin (EAN) | 7433606160121 |
FAQ
FAQ
What are these M4 threaded feet used for?
They are designed to be glued to letters or signage so you can easily attach M4 threaded ends for mounting.
How do I install the threaded feet?
Clean and degrease the surface, apply a suitable adhesive, and press the foot firmly into place. Let the glue cure fully before installing the M4 threaded end.
Can I use these threaded feet outdoors?
Yes, they are suitable for both indoor and outdoor applications when used with an appropriate adhesive for the environment.
Are these compatible with Easyfix Steel Plus spacers?
Yes, these threaded feet can be used in combination with Easyfix Steel Plus spacers for a clean and practical mounting setup.
What thread size do these feet support?
They are made for M4 threading, so they match standard M4 threaded ends and hardware.
What are the dimensions of the threaded feet?
Each foot is 8 mm long and has an outer diameter of 13 mm, which helps create a stable glued contact area.
How can I make the bond extra strong?
For a stronger connection, drill a 7 mm hole and glue the foot upside down into the hole. This increases mechanical grip as well as adhesion.
What type of adhesive should I use?
Use a high-quality adhesive that fits your substrate and usage conditions. For best results, follow the glue manufacturer’s instructions for prep and curing time.
Do I need special tools for installation?
Basic tools are usually enough for bonding and alignment. If you choose the stronger method, you’ll also need a drill with a 7 mm bit.
How do I maintain and clean the mounted setup?
Wipe the visible parts with a soft cloth and mild cleaner. Avoid aggressive chemicals so the finish and glued joint stay in good shape.
Disclaimer: This product information is subject to errors and changes. No rights can be derived from the content.