Dibond hanger photo hanging system 45x45mm with wallmount
This Dibond hanger is a perfect photo hanging system for hanging your dibond photo panels up to 1KG.
You simply stick the hanging plate on the back of the panel, after which you can easily hang your photo on the wall only in combination with the supplied wall bracket.
When using two hanging plates, the maximum capacity does not double, it increases by approximately 50%. When using two hanging plates to hang a panel, they must always be mounted separately with the supplied mounting material. The hanging plates must not be connected to each other. A connection between the plates can cause them to rotate, which creates a torsional force instead of a pure tensile force on the tape. This can adversely affect the adhesion of the tape and increase the risk of loosening. The Dibond hanger is equipped with super strong acrylic tape. This is even stronger than VHB tape.
NOTE the picture must remain under pressure of a weight for 24 hours before you hang it. Tip: When using hanging plates, we recommend using 2 hanging plates for a size above 80 cm.
This product contains a 45x45mm dibond hanger, wall bracket, alcohol wipe, bumpers, screw and plug.
You simply stick the hanging plate on the back of the panel, after which you can easily hang your photo on the wall only in combination with the supplied wall bracket.
When using two hanging plates, the maximum capacity does not double, it increases by approximately 50%. When using two hanging plates to hang a panel, they must always be mounted separately with the supplied mounting material. The hanging plates must not be connected to each other. A connection between the plates can cause them to rotate, which creates a torsional force instead of a pure tensile force on the tape. This can adversely affect the adhesion of the tape and increase the risk of loosening. The Dibond hanger is equipped with super strong acrylic tape. This is even stronger than VHB tape.
NOTE the picture must remain under pressure of a weight for 24 hours before you hang it. Tip: When using hanging plates, we recommend using 2 hanging plates for a size above 80 cm.
This product contains a 45x45mm dibond hanger, wall bracket, alcohol wipe, bumpers, screw and plug.
In stock
€2.44
€2.02
- Price per item (excl. tax)
-
€2.32
€1.92
(save 5%)
-
€2.20
€1.82
(save 10%)
-
€2.08
€1.72
(save 15%)
-
€1.96
€1.62
(save 20%)
-
€1.84
€1.52
(save 25%)
-
€1.71
€1.41
(save 30%)
-
€1.22
€1.01
(save 50%)
-
€1.10
€0.91
(save 55%)
Article number | OP045045ACR |
---|---|
Width (mm) | 45 |
length (mm) | 45 |
Head thickness (mm) | 1 |
gtin (EAN) | 7433605964980 |
1) Allow the panel and the mounting plate to acclimate to room temperature (20 ° C).
2) Remove the protective film from the back of the panel.
3) Determine the location of the hanging plate in the center at 1/4 distance from the top. Clean this area with the alcohol swab and dry with kitchen paper.
4) Stick the hanging plate to the panel and press firmly for 20 seconds.
5) Pressurize the mounting plate with a heavy object (15 kg) and let it rest for 1 hour.
6) Wait 24 hours before hanging the panel.
NOTE: Not suitable for plexiglass with print on the back.